======Synchronize time with external NTP server on Windows Server 2008======
Time synchronization is an important aspect for all computers on the network. By default, the clients computers get their time from a Domain Controller and the Domain Controller gets his time from the domain’s PDC Operation Master. Therefore the PDC must synchronize his time from an external source. I usually use the servers listed at the NTP Pool Project website. Before you begin, don’t forget to open the default UDP 123 port (in- and outbound) on your (corporate) firewall.
First, locate your PDC Server. Open the command prompt and type: C:>netdom /query fsmo Log in to your PDC Server and open the command prompt. Stop the W32Time service: C:>net stop w32time Configure the external time sources, type: C:> w32tm /config /syncfromflags:manual /manualpeerlist:”0.pool.ntp.org, 1.pool.ntp.org, 2.pool.ntp.org” Make your PDC a reliable time source for the clients. Type: C:>w32tm /config /reliable:yes Start the w32time service: C:>net start w32time The windows time service should begin synchronizing the time. You can check the external NTP servers in the time configuration by typing: C:>w32tm /query /configuration You can also check the status: C:\Users\tmullaly>w32tm /query /status Leap Indicator: 0(no warning) Stratum: 3 (secondary reference - syncd by (S)NTP) Precision: -6 (15.625ms per tick) Root Delay: 0.0978394s Root Dispersion: 7.8137172s ReferenceId: 0xCE392C11 (source IP: 188.8.131.52) Last Successful Sync Time: 12/18/2012 7:15:14 PM Source: 1.pool.ntp.org Poll Interval: 6 (64s)
Check the Event Viewer for any errors. Tested on Windows Server 2008 Standard